Security Settings
Find risky API keys, clean up unused ones, and restrict API keys to a list of trusted IP addresses.
The Key safety section of dashboard Settings (anyrouter.dev/dashboard/settings#key-safety) has three tabs: Overview, Key safety and IP allowlist.
Overview
Four cards count active keys needing attention: No spend limit, Never expires, Never used or idle (never used, or unused 90+ days) and Safe to remove (idle 90+ days, under $1 lifetime spend). Click one to open Key safety filtered to it. Owners and admins can Copy CSV of every active key with its owner.
Key safety
Lists active sk-ar-v1 keys; turn on Management keys to include management keys. Filter by name (owners and admins also by owner), Risk, Inactivity (30, 60, 90, 180+ days, never used) or Safe to remove.
The Risk column flags no spend limit, a limit of $1,000 or more, no expiry, or an expiry over 365 days away. Several flags show red.
| Status | Meaning |
|---|---|
| Safe to remove | Idle 90+ days and spent under $1. |
| Review | Idle 90+ days but carried real traffic. Check first. |
| In use | Used in the last 90 days, or created recently. |
Owners and admins can act on each key:
- Set limit: add or change the spend limit.
- Disable: stops the key within about a minute. Re-enable it from API keys.
- Archive: permanent. Type
archiveto confirm.
To retire a key that never expires, rotate it: create a new key with an expiry and spend limit, move your apps to it, disable the old key, then archive it once nothing breaks.
IP allowlist
Limits which IPs can use your workspace's keys. Available on Pro and above, though you can remove entries on any plan.
- Add IPv4 (
203.0.113.7), IPv6 (2001:db8::1) or CIDR ranges (203.0.113.0/24,2001:db8::/32), each with an optional label. An empty list allows every IP. - With at least one entry, every request using an
sk-ar-v1key in the workspace must come from a listed IP. - Changes apply to all workspace keys within about a minute. The dashboard is not affected.
- Owners and admins edit; members can view. Add my IP adds your current address. List every server, CI runner and office network first.
A blocked request returns 403:
{
"error": {
"message": "Requests from IP 198.51.100.4 are not allowed for this workspace. Add it to the IP allowlist in Security settings.",
"type": "permission_error",
"code": "ip_not_allowed"
}
}Manage with the API
Use a management key with the read:security or write:security scope:
curl https://anyrouter.dev/api/v1/security/ip-allowlist \
-H "Authorization: Bearer $ANYROUTER_MANAGEMENT_KEY"
curl -X POST https://anyrouter.dev/api/v1/security/ip-allowlist \
-H "Authorization: Bearer $ANYROUTER_MANAGEMENT_KEY" \
-H "Content-Type: application/json" \
-d '{"cidr": "203.0.113.0/24", "label": "Office"}'
curl -X DELETE https://anyrouter.dev/api/v1/security/ip-allowlist/<id> \
-H "Authorization: Bearer $ANYROUTER_MANAGEMENT_KEY"GET /api/v1/security/keys returns the active keys shown on Key safety.
AnyRouter routes requests to third-party models. Models and outputs are provided as is, with no warranty; you use them at your own risk. Disclaimer